October 29, 2020
8:30 am - 3:00 pm
Bill Amend will Present “Introduction to Pipeline Steels: Metallurgy, Manufacturing, Standards, and Specifications” as a webinar on October 29, 2020 at 8:30 am CDT.
This training has the minimum required to hold the class. Further information to be provided upon registration.
Maybe you think this class is not necessary. Maybe you think that as long as the pipe meets API 5L, that is good enough, and no further understanding is needed. Maybe you think an understanding of metallurgy is just for the materials engineers. Maybe you already know that a low carbon equivalent is preferred for welding; therefore, a very low carbon equivalent is always best, right? Maybe you think stress relief considerations for a quenched and tempered fitting can be the same as for a normalized fitting. Maybe you “know” that seamless pipe is preferred for compressor and pump station applications because that way, there is no seam to fail from fatigue. Maybe you “know” that X70 is more difficult to weld than X52 because it is harder and stronger. Maybe you “know” that Lab “A” is wrong because their tensile test results are different from those of Lab “B”. This webinar will show you that you are wrong. Or maybe you want some clarification of the difference between hardness, toughness, and ductility and want a better understanding of how they are measured and how they are influenced by steel manufacturing. And, what is the big deal with “hard spots” or LF ERW? If you do testing on a couple of randomly selected pipe joints, will the results be representative of the entire pipeline segment? Join in and find out.
Or maybe you want some clarification of the difference between hardness, toughness, and ductility and want a better understanding of how they are measured and how they are influenced by steel manufacturing. And, what is the big deal with “hard spots” or LF ERW? If you do testing on a couple of randomly selected pipe joints, will the results be representative of the entire pipeline segment? Join in and find out.
This 6-hour (Including lunch break) webinar will introduce attendees to the topic of pipeline metallurgy and how manufacturing, standards, and specifications influence pipeline mechanical properties, weldability, and long-term integrity. The webinar starts with a description of how pipelines fail since the failure modes influence what metallurgical measures are taken to minimize susceptibility to those failures. The major types of pipe and fitting manufacturing processes, and common flaws associated with them will be reviewed. The review will include a brief summary of some historical practices that influence current pipeline characteristics. Attendees will learn the significance of yield strength, ultimate tensile strength, hardness, toughness, and composition and how those attributes are specified and measured, including how test procedures can influence results. Attendees will also be introduced to the topic of pipeline welding since welding can have a significant impact on pipe properties and susceptibility to various forms of in-service degradation.
Short breaks throughout
A one hour lunch break at 11:30 p.m. CDT.
5.5 PDHs with Certificate of Completion provided
- What Characteristics are Important in Pipeline Steel and How are They Measured?
- Strength (YS and UTS)
- Toughness (static and dynamic testing)
- How is Pipeline Steel Made?
- Influence of composition
- Ingot casting v. continuous casting
- Influence of processing (example: rolling and forming, heat treatment, cold expansion)
- How is Pipe Made?
- Seamless pipe
- Seamed pipe
- Typical flaws and vulnerabilities
- What Happens When We Weld Pipeline Steel?
- Weld metal/welding process selection
- Changes in the heat affected zone: strength, toughness, corrosion susceptibility
- What Codes and Standards Address Pipeline Steel and Pipe/Fitting Manufacturing?
- How have Manufacturing and Fabrication Practices Changed Over Time and What Does That Mean for Pipeline Integrity?
This Webinar Rated 5 Stars Out Of 5 By Attendees!
“Wealth of knowledge and experience. Excellent presenter.”
“Well-spoken and easy to understand.”
“Pitched consistently at the correct level.”
“The instructor was well versed in the topic, able to answer questions from the audience, and has excellent presentation skills.”
“Instructor was good, very knowledgeable.”
“This was a great presentation. A lot of good material.”
“There was a lot of material presented in a relatively short period of time. the reference materials will come in handy.”
100% of respondents would recommend this training to a colleague within or outside of their company.
Bill Amend has 41 years of experience performing pipeline integrity management, failure analysis, metallurgical engineering, and welding engineering services. His background includes 26 years working for pipeline operators (Unocal and Southern California Gas Co.) before working for engineering services providers. He is currently Senior Engineer at DNV GL. He is a co-author of the ASME report CRTD Vol. 91 regarding field measurement of hardness to determine the lower bound yield strength of pipe and has managed and conducted various research projects for ASME, DNV GL, NYSEARCH and PRCI addressing the continued development and validation of methods for nondestructive determination of pipe properties, chemical analysis of steel, tensile testing, and characteristics of early vintage pipeline girth welds. He is a registered professional Metallurgical Engineer in California and graduated from California Polytechnic State University in San Luis Obispo (Cal Poly SLO).
Join us for this event remotely by registering and logging in on your preferred digital device.