January 15, 2019 - January 16, 2019
8:00 am - 12:00 pm
This training has passed.
This training program is an extensive and dynamic one and one half day (1.5 day) course that covers:
- Understanding and recognizing pipe defects
- Flaw detection
- Measurement corrosion features/defects
- Analysis of corrosion features and feature identification
- Data features for post processing and reporting
- ASME B31.G, ASME B31.G Modified and RSTRENG+ for corrosion
Students will receive:
–Trial of RSTRENG software
–Course notes in paper and flash drive format
–Certificate of Completion awarding 12 PDHs
This training program is for certification, training, and testing of individuals seeking technical certification for corrosion assessment. In addition, dents, gouges, weld anomalies and related pipe and vessel defects will be covered for assessment and analysis.
Written Examination Required
Practical Examination Required
A Level 1 practical examination consists of the following two (2) types of defects to be analyzed:
—–Corrosion assessment on multiple pipe samples using B31.G, Modified B31.G and RSTRENG analysis with report and spreadsheet.
—– Dent assessment with ASME B31.8 and Modified B31.8 analysis .
—– Gouge analysis with ASME B31.3 and ASME B31.8 analysis
–Introduction to Pipe Defects
–Site Analysis and Documentation
–Locate & Define Defects
–Corrosion Mapping Tools
–Identify & Classify Corrosion and Other Indications
–Prioritization of Indications
–Analysis and Report Results
-Intro to PL Metallurgy
–Types of Pipe
-Why Pipelines Fail
–What Flaws Impact the Pipeline
–What Data is Required for Assessment
-Identify Risk Factors
–RSTRENG+, ASME B31.G, Modified ASME B31.G
-Composite and Metallic Sleeves
–Type A & B
–Understanding Barlow’s Formula
–Data Input Requirements
–Exporting from Excel or other tools
1. ASME B31.G – Level 1
2. ASME Modified B31.G – Level 1
3. RSTRENG – Level 2
Corrosion defects to be analyzed
–Corrosion assessment on pipe samples using B31.G, Modified B31.G and RSTRENG analysis with report and spreadsheet.
–Review Test Results
“Very interesting. Most of the course directly related to work that I am currently working on.”
“Excellent insight into the industry and methods used.”
“Joe is passionate about the subject and so was able to keep us engaged.”
“3D models for measuring were great and presentation was through.”
The handouts are “a great guide and reference tool for the future.”
Joe Pikas has more than 50 years of experience in cathodic protection, above and underground coatings, and corrosion control design and implementation which includes project engineering management. He is an expert in pipeline integrity management, risk management, coating materials selection, cathodic protection design and testing, and pipeline internal and external corrosion control.
In 2009, he was awarded the NACE Distinguished Service Award, and received an industry award in 2002 from AGA, GTI, INGAA, NACE, OPS, and PRCI International. Also, he has contributed many papers for industry trade magazines, NACE and SSPC publications and conferences.
- NACE Distinguished Service Award for 2009.
- Received industry award in 2002 with the Utmost Respect and Gratitude from AGA, GTI, INGAA, NACE, OPS, and PRCI International.
- Received Long Neck Award from Big Inch Marine in the research and development for pre-fabricated isolating flanges.
- Received Brandon Award for Outstanding Service from the Coating Society of the Houston Area
Venue: Houston, TX