November 6, 2019 - November 7, 2019
8:00 am - 12:00 pm
Matt Boring will present “What You Need to Know About In-Service Welding,” on November 6 and 7, 2019, in Reading, PA.
Performing welding operations onto operating pipelines for maintenance purposes or to attach branch connections is very dangerous. These operations require proper procedures, welder qualifications, and must address safety issues successfully. Published documentation and recommended practices and procedures regarding in-service welding, commonly referred to as hot-tapping or hot-tap welding, are continually being updated and pipeline engineers are constantly faced with problem solving in this arena.
Day 1: time 8:15 am to 4:30 pm.
Day 2: time 8:15 am – 12 pm
12 PDHs available with Certificate of Completion
Who Should Attend?
– Engineers, technicians, and service professionals involved with construction, maintenance, inspection, and repair of liquids, gas, and products pipelines
– Project managers with oversight for third party engineering or maintenance
– Project and facility managers concerned with system integrity and maintenance
This training will address in-service welding onto gas and liquid pipelines under both typical and non-typical conditions. It describes the concerns, design implementation, inspection and testing of in-service welds with particular emphasis on regulation/compliance review, recommended practices and case studies. In addition to the lecture portion, the course is designed to enable participants to successfully run PRCI Thermal Analysis Model for Hot Tap® Welding software and interpret the results.
The first portion of the course provides participants with an understanding of the factors that contribute to burn-through or cracking. Participants will also learn the highlights of various technical resources that supplement the PRCI Thermal Analysis Model for Hot Tap® Welding program to provide a more comprehensive body of technical information pertaining to welding onto operating pipelines.
- Factors influencing burnthrough
- Determining burnthrough risk
- Recent research
- Failures attributed to hydrogen cracking
- Factors influencing hydrogen cracking
- Hydrogen cracking mitigation
In-Service Welding Applications
- Full-encirclement repair sleeves
- Hot-tapped branch connections
- Weld metal deposition
Developing In-Service Welding Procedures
- Procedure options
- Selecting appropriate procedures
What the Applicable Codes and Standards Say About In-Service Welding
- API 1104 Appendix B
- ASME codes
- CSA Z662
Things To Do Before You In-Service Weld
- Pre-weld inspection
- Heat input monitoring
- Field Guidance
- Other in-service welding concerns
Things To Do After You Perform An In-Service weld
- Non-destructive testing methods
- Confirmation coupons
Lessons To Be Learned and Simplified Approach to In-Service Weld
- Reported incidents
- Previously unreported incidents
- Five general rules of thumb
The Role of PRCI Thermal Analysis Model for Hot Tap® Welding In Developing And Selecting Welding Procedures For Use On Pressurized Pipes
- History of thermal analysis models
- Interpolating between qualified procedures
- Doing “what-if” scenarios and sensitivity analyses
- Operating the PRCI Thermal Analysis Model for Hot Tap® Welding
- Interpreting the PRCI Thermal Analysis Model for Hot Tap® Welding software results
- Sources of error and conservatism
Course notes in paper and flash drive format
Certificate of completion
Breakfast and Lunch
“Great content. Learned a lot and was able to confirm or enhance knowledge I already had.”
“Matt is clear and concise. He is a great presenter.”
“Handouts were very useful. Provided valuable information.”
“Answers to questions very good and understandable for blue collar beer drinkers. Excellent!”
“The videos were great!”
“Very knowledgeable and engaging instructor.”
Mr. Boring is a pipeline welding engineer who is primarily involved in new pipeline construction including engineering critical assessments (ECA) as well as pipeline rehabilitation including in-service welding or hot-tap welding. Mr. Boring started his career with EWI where he was responsible for a wide range of welding research projects for the pipeline, offshore structures, pressure vessel and nuclear industries. Mr. Boring joined Kiefner and Associates 2012 where he continued his focus on welding research while expanding into the areas of code compliance and failure investigations of pipeline and associated components. More recently he joined the Incident Investigation Group at DNV GL where he continues to support the pipeline industry by providing a range of consulting services ranging from new construction, fitness for service, pipeline rehabilitation and integrity.
Throughout his career, Mr. Boring has been heavily involved in oil and gas industry code development including membership and holding offices to several of the industry welding qualification codes. These memberships include being an API 1104 Committee voting member, ASME Section IX Committee member, ASME Section IX Sub-group member on welding qualifications, ASME PCC-2 Committee member and ASME PCC-2 Repair and Testing Subcommittee member. Mr. Boring is currently the co-chair of API 1104 Annex B Sub-committee which oversees the API 1104 in-service welding requirements and the chair of the ASME PCC-2 Welded Repair Sub-group.
Mr. Boring is a registered Professional Welding Engineer in the State of Ohio as well as an AWS Certified Welding Engineer and AWS Certified Welding Inspector.
Venue: Reading, PA